 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTGS4111P Power MOSFET -30 V, -4.7 A, Single P-Channel, TSOP-6 Features * * * * * Leading -30 V Trench Process for Low RDS(on) Low Profile Package Suitable for Portable Applications Surface Mount TSOP-6 Package Saves Board Space Improved Efficiency for Battery Applications Pb-Free Package is Available http://onsemi.com V(BR)DSS -30 V 68 mW @ -4.5 V P-Channel 1256 RDS(on) TYP 38 mW @ -10 V -4.7 A ID MAX Applications * Battery Management and Switching * Load Switching * Battery Protection MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Rating Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current (Note 1) Steady TA = 25C State TA = 85C t5s Power Dissipation (Note 1) TA = 25C PD Steady TA = 25C State t5s Continuous Drain Current (Note 2) Power Dissipation (Note 2) Pulsed Drain Current Steady TA = 25C State TA = 85C TA = 25C tp = 10 ms ID Symbol VDSS VGS ID Value -30 20 -3.7 -2.7 -4.7 1.25 2.0 -2.6 -1.9 PD IDM TJ, TSTG IS TL 0.63 -15 -55 to 150 -1.7 260 W A C A C TG M Unit V V A 4 3 W MARKING DIAGRAM & PIN ASSIGNMENT Drain Drain Source 654 A 1 TSOP-6 CASE 318G STYLE 1 TG M G G 123 Drain Drain Gate = Specific Device Code = Date Code* = Pb-Free Package Operating Junction and Storage Temperature Source Current (Body Diode) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) G THERMAL RESISTANCE RATINGS Rating Junction-to-Ambient - Steady State (Note 1) Junction-to-Ambient - t 5 s (Note 1) Junction-to-Ambient - Steady State (Note 2) Symbol RqJA RqJA RqJA Max 100 62.5 200 Unit C/W (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Device NTGS4111PT1 NTGS4111PT1G Package TSOP-6 Shipping 3000 / Tape & Reel Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Surface-mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces). 2. Surface-mounted on FR4 board using the minimum recommended pad size (Cu area = 0.006 in sq). TSOP-6 3000 / Tape& Reel (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2006 1 April, 2006 - Rev. 2 Publication Order Number: NTGS4111P/D NTGS4111P ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Characteristic OFF CHARACTERISTICS Drain-to-Source Breakdown Voltage Drain-to-Source Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current V(BR)DSS V(BR)DSS/TJ IDSS VGS = 0 V, VDS = -24 V TJ = 25C TJ = 125C VGS = 0 V, ID = -250 mA -30 -17 -1.0 -100 100 nA V mV/C mA Symbol Test Condition Min Typ Max Unit Gate-to-Source Leakage Current ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain-to-Source On Resistance IGSS VDS = 0 V, VGS = 20 V VGS = VDS, ID = -250 mA VGS = -10 V, ID = -3.7 A VGS = -4.5 V, ID = -2.7 A VGS(TH) VGS(TH)/TJ RDS(on) -1.0 5.0 38 68 6.0 -3.0 V mV/C 60 110 mW Forward Transconductance gFS VDS = -10 V, ID = -3.7 A S CHARGES, CAPACITANCES AND GATE RESISTANCE Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Threshold Gate Charge Gate-to-Source Charge Gate-to-Drain Charge CISS COSS CRSS QG(TOT) QG(TH) QGS QGD VGS = -10 V, VDD = -15 V, ID = -3.7 A VGS = 0 V, f = 1.0 MHz, VDS = -15 V 750 140 130 15.25 0.8 2.6 3.4 32 nC pF SWITCHING CHARACTERISTICS, VGS = -10 V (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) tr td(OFF) tf VGS = -10 V, VDD = -15 V, ID = -1.0 A, RG = 6.0 W 9.0 9.0 38 22 17 18 85 45 ns SWITCHING CHARACTERISTICS, VGS = -4.5 V (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time DRAIN - SOURCE DIODE CHARACTERISTICS Characteristic Forward Diode Voltage Symbol VDS Test Condition VGS = 0 V, IS = -1.0 A TJ = 25C TJ = 125C Min Typ -0.76 -0.60 24 VGS = 0 V dIS/dt = 100 A/ms, IS = -1.0 A 9.0 15 12 nC 60 ns Max -1.2 Unit V td(ON) tr td(OFF) tf VGS = -4.5 V, VDD = -15 V, ID = -1.0 A, RG = 6.0 W 11 15 28 22 20 28 56 50 ns Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge tRR ta tb QRR 3. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTGS4111P TYPICAL PERFORMANCE CURVES (TJ = 25C unless otherwise noted) 12 -ID, DRAIN CURRENT (AMPS) 11 10 9 8 7 6 5 4 3 2 1 0 0 0.4 0.8 1.2 -5 V -10V -4.5 V -4.2 V -8 V -6 V -5.5 V -3.6 V -3.4 V -3.2 V -3 V TJ = 25C 1.6 2 2.4 2.8 3.2 3.6 4 -3.8 V 12 -4 V -ID, DRAIN CURRENT (AMPS) 11 10 9 8 7 6 5 4 3 2 1 0 1 25C TJ = -55C 1.5 2 2.5 3 3.5 4 4.5 -VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 5 VDS -10 V 100C -VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 1. On-Region Characteristics RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0.1 Figure 2. Transfer Characteristics 0.2 TJ = 25C ID = -3.7 A TJ = 25C VGS = -4.5 V 0.05 VGS = -10 V 0.1 0 2 3 4 5 6 7 8 9 10 -VGS, GATE VOLTAGE (VOLTS) 0 2.0 3.0 -ID, DRAIN CURRENT (AMPS) 4.0 Figure 3. On-Resistance vs. Gate-to-Source Voltage 1.5 RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) ID = -3.7 A VGS = -10 V 100000 Figure 4. On-Resistance vs. Drain Current and Gate Voltage VGS = 0 V -IDSS, LEAKAGE CURRENT (nA) TJ = 150C 10000 1.0 1000 TJ = 100C 0.5 -50 100 -25 0 25 50 75 100 125 150 5 TJ, JUNCTION TEMPERATURE (C) 10 15 20 25 -VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 30 Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 3 NTGS4111P TYPICAL PERFORMANCE CURVES (TJ = 25C unless otherwise noted) -VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) TJ = 25C -VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 1400 Ciss 1300 1200 C rss 1100 1000 900 800 700 600 500 400 300 Coss 200 100 VDS = 0 V VGS = 0 V Crss 0 5 5 15 10 0 10 -VGS -VDS 12 QT VDS VGS 10 8 6 4 2 0 0 1 2 QGS QGD 20 C, CAPACITANCE (pF) Ciss 10 20 25 30 0 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Qg, TOTAL GATE CHARGE (nC) ID = -3.7 A TJ = 25C -GATE-TO-SOURCE OR DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 7. Capacitance Variation Figure 8. Gate-to-Source Voltage vs. Total Gate Charge 100 -IS, SOURCE CURRENT (AMPS) -I D, DRAIN CURRENT (AMPS) 10 VGS = 0 V TJ = 150C 10 100 ms 1 ms VGS = -20 V SINGLE PULSE TC = 25C RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 10 ms 1 1 TJ = 100C TJ = 25C 0.1 dc 0.01 0.1 1 10 -VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 100 0.1 0.3 TJ = -55C 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 -VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) Figure 9. Maximum Rated Forward Biased Safe Operating Area Rthja(t), EFFECTIVE TRANSIENT THERMAL RESPONSE 1 D = 0.5 0.2 0.1 0.1 0.05 0.02 0.01 0.01 Figure 10. Diode Forward Voltage vs. Current 0.001 Single Pulse 1E-06 1E-05 1E-04 1E-03 1E-02 t, TIME (s) 1E-01 1E+00 1E+01 1E+02 1E+03 0.0001 1E-07 Figure 11. FET Thermal Response http://onsemi.com 4 NTGS4111P PACKAGE DIMENSIONS TSOP-6 CASE 318G-02 ISSUE P D 6 5 1 2 4 3 HE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MILLIMETERS NOM MAX 1.00 1.10 0.06 0.10 0.38 0.50 0.18 0.26 3.00 3.10 1.50 1.70 0.95 1.05 0.40 0.60 2.75 3.00 10 - INCHES NOM 0.039 0.002 0.014 0.007 0.118 0.059 0.037 0.016 0.108 - b e q 0.05 (0.002) A1 A L c DIM A A1 b c D E e L HE q MIN 0.90 0.01 0.25 0.10 2.90 1.30 0.85 0.20 2.50 0 MIN 0.035 0.001 0.010 0.004 0.114 0.051 0.034 0.008 0.099 0 MAX 0.043 0.004 0.020 0.010 0.122 0.067 0.041 0.024 0.118 10 STYLE 1: PIN 1. DRAIN 2. DRAIN 3. GATE 4. SOURCE 5. DRAIN 6. DRAIN SOLDERING FOOTPRINT* 2.4 0.094 1.9 0.075 0.95 0.037 0.95 0.037 0.7 0.028 1.0 0.039 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 5 NTGS4111P/D |
Price & Availability of NTGS4111PT1G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |